If you would like to give your table legs a new coat of paint or if you are simply looking for an easy way to refinish them, then sanding may be the right solution for you.

Here is a guide on how to do it: Prep the surface by washing and drying it thoroughly. Use an electric sander with medium-grit sandpaper to remove any irregularities or blemishes on the surface.

Apply a coat of primer or paint according to the desired finish, and let it dry completely before applying another layer of sanding sealant if desired.

How To Sand Table Legs

Source: quora

How To Sand Table Legs

If you are looking to refinish or restore your old furniture, then you will need to sand the legs. There is no one perfect way to do this, as each person has their own method that they find most effective.

However, there are a few tips that can help you get the job done quicker and with less hassle. Wet the legs before sanding in order to reduce friction. Use a fine sandpaper in order to achieve a smooth finish.

Apply pressure when sanding in order to prevent gouging or damage to the wood. Sand in a cross pattern for best results.

Wet The Legs Before Sanding

Wetting the legs of the table before sanding will help to prevent damage and make the process go smoother. Make sure to use a good quality sandpaper and start with a low grit if you want to avoid scratches.

Sand the legs until they are smooth, paying attention to any areas that may have blemishes or irregularities. Be sure to clean the sanded area before continuing with the next step, as this can lead to wood chips flying around during sanding.

If you notice any water spots on the surface of your table legs after sanding, dry them off using a towel before proceeding with painting or finishing. Finally, apply a coat of sealant or varnish to protect your newly-sanded surface and finish your project.

Use A Fine Sandpaper

When sanding table legs, start by using a coarse sandpaper to rough up the surface. From there, use a finer sandpaper to smooth out the finish. Use a light hand when sanding so you don’t damage the wood.

Be sure to switch between sandpapers as needed to achieve the desired result. Once you’ve finished sanding, wipe down the leg with a damp cloth to remove any dust or particles. Finally, apply a sealer or varnish to protect the wood from future scratches and dents.

Apply Pressure When Sanding

When sanding table legs, it is important to apply pressure when sanding. This will help prevent the wood from warping and splitting. Make sure to use a block or a piece of wood to apply pressure so that you don’t damage your fingers.

Use a -grit sandpaper to start with and then work your way up to a -grit sandpaper if needed. Always wear appropriate safety gear when sanding and always follow the manufacturer’s instructions for the specific type of wood you are working with.

Sanding table legs is an easy project that can quickly improve the look of your tabletop.

Sand In A Cross Pattern

Sanding a table in a cross pattern will give it a distressed look that can be really beautiful and unique. When sanding the legs of your table, start by applying pressure to the grain of the wood.

Use moderate pressure when sanding so that you don’t create any tears or cracks in the surface. When you’re finished sanding, use a clean cloth to buff the wood until it’s shiny and smooth. To make sure the distressed finish lasts, avoid using water or harsh chemicals on your table legs.

For added protection, apply a coat of sealer before letting the table dry completely. You can change up your distress look by sanding different parts of your table at different times. Experiment with different patterns and see what looks best on your particular table.

Preparing The Wood

When sanding table legs, you will want to use a fine-grit sandpaper. You can also use an orbital sander to achieve a smoother finish. Make sure to keep your hands and the wood surface wet while sanding to avoid dust build-up.

After finishing the sanding, you can apply a finish of your choice. Some people choose to seal their wood with a sealant or lacquer. Others prefer to leave the wood unfinished so that it can age and develop its natural color over time.

As long as you follow these simple steps when sanding table legs, you’ll be able to get the look that you desire.

Sanding The Legs

When it comes to sanding the legs of your table, take care when doing so to avoid any scratches or dents. To get the best results, use a fine-grit sandpaper and work from the top down.

Make sure that you wet the wood before sanding in order to reduce friction and prevent damage. Protect your floor surface by covering it with a tarp or drop cloth when sanding your table legs.

After sanding is complete, wash the wood with a mild soap and water to remove any dust or debris. Finally, seal the finish with a coat of wax or an oil-based paint protector to protect the wood from future weathering and damage.

Follow these simple steps for a smooth and flawless finish on your table legs.

Rounding The Edges

To sand table legs without ruining the finish, take care to use the right technique and materials. You can use a belt sander or electronic sanding units for this task. Start by using coarse sandpaper on the bottom of your leg to rough it up.

Then switch to finer sandpaper to smooth out the edges and finish the job. Be careful not to overdo it, or you’ll end up with scratches in your finish. Cleanup is easy with a damp cloth and some mild soap; just be sure to dry them completely before storing them away again.

Now that you know how to sand table legs without damaging their finish, you’re ready to tackle any project.

Finishing Touches

If you want to give your table a polished look, it is important to sand the legs properly. You don’t need to use an excessive amount of sandpaper when sanding leg frames; just enough to smooth the surface.

Use a block or an old newspaper when dusting off the excess sanding residue before applying a sealant or paint. Apply a clear coat of finish only if necessary – usually only for tables with high-traffic areas.

Remember to test any sealants, paints, or finishes on an inconspicuous area first! When refinishing Table Legs, be sure not to leave any rough edges – this will cause scratches and blemishes over time. For a more durable finish that resists fading and staining, use a water-based sealer like ® Polycrylic® Sealant instead of traditional varnishes and paints.

Be sure to read the product directions carefully before beginning – many have special requirements such as waiting hours after application before using wood furniture. Finally, take care when moving furniture around – especially delicate pieces like table legs – so they don’t get scratched or dented in the process.


Sanding table legs is a simple task that can be done with a few household items. Ensure that the surface you are sanding is clean and dry before beginning, as grit will cause problems when sanding.

Use a coarse grit to start, then work your way down to a finer grit if necessary. Be patient while sanding; it may take several minutes for each leg to achieve the desired finish.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *