If you want to make wood that is not sticky, one way to do this is by using a degreaser. You can also use wax or oil as a lubricant. Be sure to test the wood first to see if it’s safe for your project.

Source: Blogspot
How To Make Stained Wood Not Sticky
One of the most common problems with stained wood is that it becomes very sticky. This problem can be remedied by following a few simple steps. First, clean the wood with a soap-free cloth.
Second, apply a clear coating to the wood. Finally, allow the stain to dry.
Clean Wood With A Clean, Soap-Free Cloth
If you have wood that’s started to become stained, there are a few things you can do to try and get it clean. First, use a clean, soap-free cloth to gently wipe the stain away. If that doesn’t work, you can try using a diluted bleach solution or rubbing alcohol. Be sure to test the solution on a small area first to make sure it won’t damage your wood.
- If you find that your wood is becoming sticky after cleaning it with a soap-free cloth, there may be some dirt or residue on the surface that needs to be removed.
- To clean your wood without using soap, first wet the cloth in water and wring it out. Then place it on the wood and rub it around in a circular motion. Be sure to get under the seams and between the grains of wood.
- For stubborn stains, use a diluted solution of chlorine bleach (part bleach to parts water) to clean the wood. Apply the solution with a sponge or a cloth and rinse off the area with clean water.
- If you still find that your wood is getting dirty quickly, you may need to have it treated by a professional cleaner.
Apply A Clear Coating
There are a few ways to make stained wood not stick to your projects. One of the simplest methods is to apply a clear coating to the wood before starting your project. Clear coatings protect the wood from moisture and other environmental factors that can cause it to shrink or warp over time.
When applying a clear coating, use a high-quality product that adheres well to the surface of the wood. Be sure to clean your tools and surfaces before beginning your project so that you don’t contaminate the clear coating with dirt or other materials. Once you have applied a clear coat, be patient; it may take up to two hours for it to dry completely.
Don’t sand or paint over the clear coat until it is completely dry; this could damage the finish on the wood. If you do need to repaint or refinish your stained wood, be sure to remove all of the previous clear coat before starting your project. Clear coats are available in many colors and styles; choose one that will complement your project and furniture pieces.
Keep in mind that clear coats can be expensive, so choose one that will last long and provide maximum protection for your investment
Allow The Stain To Dry
If you have wood that has been stained, there are a few steps you can take to make it not as sticky. Sand the surface of the wood until it is smooth. This will help prepare the surface for the stain and also remove any oils or waxes that may be on the wood.
Apply the stain to the prepared surface and wait for it to dry completely before wiping off any excess with a cloth or paper towel. Finish sanding if needed and give your wood a coat of sealant or paint to protect it from future staining.
Remove The Stain
If you have a stain on your wood that won’t come off, there are a few things you can do to try and remove the stain. First, use a household cleaner to clean the area where the stain is located. Once the area is clean, mix some white vinegar with water and apply it to the stained area. Let the vinegar mixture sit for about 20 minutes before rinsing it off. Finally, scrub the area with a soft cloth to remove any remaining stains.
Use Vinegar
One way to remove stains from wood is to use vinegar. To do this, mix 1 part white vinegar with 2 parts water and pour it into a spray bottle. Spray the stain area with the solution, and let it sit for a few minutes before rinsing it off with water.
Use Baking Soda
Another effective way to remove stains from wood is to use baking soda. To do this, mix 1 part baking soda with 3 parts water and pour it into a spray bottle. Spray the stain area with the solution, and let it sit for a few minutes before rinsing it off with water.
Use Hydrogen Peroxide
Hydrogen peroxide can also be used to remove stains from wood. To do this, mix 3 drops of hydrogen peroxide with 1 cup of water and pour it into a spray bottle. Spray the stain area with the solution, and let it sit for a few minutes before rinsing it off with water.
Use Ammonia
Ammonia can also be used to remove stains from wood. To do this, mix 6 tablespoons of ammonia with 2 cups of water and pour it into a spray bottle. Spray the stain area with the solution, and let it sit for a few minutes before rinsing it off with water.
Waterproof The Wood
To make stained wood not be sticky, first you’ll need to waterproof the wood. This will help stop the wood from absorbing water and becoming sticky again. You can do this by using a sealant or a coating of wax.
Remove Any Dust or Dried Moisture
Dust and dried moisture can cause wood to be sticky. If you want to keep your wood from being sticky, you’ll need to first remove any dust or dried moisture. This can be done by using a vacuum cleaner with the appropriate attachments, an air duster, or a shop vac.
Apply a Good Wood Conditioner
Wood conditioners help to soften and protect the wood fibers while repelling water and other liquids. Always apply wood conditioners according to the instructions on the label.
Use a Dry Erase Marker
If you want to make sure that your wood stays dry, use a dry erase marker to write down the date, time, and location of any spills or water damage. This will help you track down and fix any problems quickly and easily.
Protect Your Wood With A Good Sealant
If you do experience water damage, make sure to apply a good sealant before it becomes permanent. Some popular sealants for this purpose include silicone sealants, urethane sealants, and polyurethane sealants.
Apply A Finish
If your wood is stained and you don’t want it to stick to the finish you applied, you can apply a sealer or lacquer. These products will help protect the finish and make the wood less sticky.
Apply a Clear or White Finish
If the stain is on the surface of the wood, applying a clear or white finish will make it easier to see and remove.
Use a degreaser
If the stain is in the wood, using a degreaser may be able to break down the stain and make it easier to remove.
use baking soda
Baking soda can also be used to remove stains from wood surfaces. Just mix one part baking soda with four parts water and scrub the area clean with a cloth.
Use hydrogen peroxide
If you are unable to get the stain out with any of the other methods, try using hydrogen peroxide. Mix two tablespoons of hydrogen peroxide with one gallon of water and pour it over the stained area. scrub until all of the stain is gone.
Rinse off immediately after use
Rinse off your wood treatment immediately after using it to avoid any damage to your wood surfaces.
To Recap
One way to make your wood stain not sticky is to use a non-stick coating. There are many types of coatings available that will work well on wood. You can also try spraying the wood with a water and vinegar solution before staining it.