Hanging oars on the wall can add a touch of coastal charm to any room. There are several methods for hanging oars, each with its own pros and cons. In this article, we will compare two of the most popular methods for hanging oars: hanging with picture-hanging hardware and hanging with rope or twine.

We will discuss the costs, ease of use, and appearance of each method to help you choose the best option for your needs. Whether you want to add a touch of nautical charm to your home or create a focal point in your office, we’ve got you covered.

Hang Oars on a Wall

4 Methods to Hang Oars on a Wall

1. Using Command Strips

Command strips are an easy and damage-free way to hang oars on a wall. Here is a step-by-step guide for using command strips to hang oars on a wall:

Tools needed:

  • Command strips
  • Measuring tape
  • Sticky notes

Step 1: Measure the center of the wall and the center of the oar. Mark the center of the wall with a sticky note.

Step 2: Flip the oar over and find the center of the back side of the oar. Mark this with a sticky note as well.

Step 3: Place one command strip on the back side of the oar at the center point and one strip at the top of the oar near the handle.

Step 4: Line up the center of the oar with the center of the wall. Remove the backing from the command strips and stick the oar to the wall.

Step 5: Hold the oar in place for a few minutes to allow the command strips to adhere properly.

Step 6: Enjoy your beautifully hanging oar on the wall!

With this method, you can easily hang your oars on the wall without having to drill holes or cause any damage to the wall. Simply remove the command strips and the oar if you want to change its location or take it down.

2. Nailing With Sawtooth Hangers

Hanging oars on a wall is a great way to bring a coastal vibe to any room. If you don’t want to drill holes in the oars and put screws in the wall, a great alternative is using sawtooth hangers and nails. This method is simple and allows you to take the oars down easily if you need to.

Step-by-Step Guide:

  1. Lay the oar out on a flat surface and determine the center of the oar. Mark the center with a sticky note.
  2. Attach the sawtooth hangers to the back of the oar. It’s best to attach one hanger at the beginning of the oar and another near the handle.
  3. Place a blanket underneath the oar to protect it while hammering.
  4. Line up the center of the sawtooth hangers with the center of the wall and transfer the marks onto the wall.
  5. Hammer in nails at the marks on the wall, being careful not to damage the wall or the oar.
  6. Place the oar on the wall, making sure it is straight and centered, and then tap it gently into place.

Tools Needed:

  • Nails
  • Sawtooth hangers
  • Hammer
  • Blanket
  • Sticky notes
  • Measuring tape or ruler

By following these steps, you can hang your oars on the wall without having to drill holes in them, and still be able to remove them easily if needed.

3. Hanging With Rope or Twine

Hanging oars on the wall with rope or twine is a unique and rustic way to display your nautical decor. This method is perfect for those who want to add a coastal vibe to their home without damaging the wall. In this guide, we’ll go over the step-by-step process and the tools you’ll need to hang your oars with rope or twine.

Step-by-Step Guide:

  1. Gather Tools: To hang your oars with rope or twine, you’ll need a drill, drill bit, screws, hooks, and rope or twine.
  2. Measure the Wall: Measure the wall space where you want to hang your oars and mark the center point with a pencil.
  3. Drill Holes: Using a drill and drill bit, drill two holes in the wall at the center point where you marked it. Make sure the holes are deep enough for the screws to be inserted.
  4. Install Hooks: Install the hooks in the drilled holes by screwing them into place.
  5. Attach Rope or Twine: Cut two pieces of rope or twine to the desired length and attach one end to each hook. Make sure the rope is tight and not too loose.
  6. Hang the Oars: Place the oars on the ropes and adjust them so they are centered and hanging straight.
  7. Secure the Rope: Tie the ropes securely to the hooks so the oars will not move or fall.

Tools Needed:

  • Drill
  • Drill bit
  • Screws
  • Hooks
  • Rope or twine

With these steps, you can easily hang your oars on the wall with rope or twine, creating a rustic and coastal feel in your home.

4. Hanging With Picture Hanging Hardware

Hanging oars on a wall using picture-hanging hardware is a classic and sturdy method that is perfect for heavier oars. It allows you to hang oars securely and prevent them from sagging over time. Here is a step-by-step guide and the tools you will need:

Tools:

  • Picture hanging hardware kit
  • Drill
  • Screwdriver
  • Measuring tape
  • Pencil
  • Level

Step-by-Step Guide:

  1. Gather the necessary tools and hardware.
  2. Determine the desired placement of the oar on the wall and measure the length of the oar.
  3. Use the measuring tape to mark the center of the oar and the center of the wall where the oar will be hung.
  4. Use the level to make sure the markings are straight and level.
  5. Attach the picture hanging hardware to the back of the oar using screws.
  6. Drill pilot holes into the wall where the hardware will be mounted.
  7. Mount the hardware onto the wall using screws and a screwdriver.
  8. Hang the oar onto the hardware and make sure it is level.

This method is a classic and sturdy way to hang oars on a wall. With the use of picture-hanging hardware, you can be confident that the oars will stay in place and not sag over time.

This method is great for heavier oars that may be too heavy for other hanging methods. With the right tools and hardware, hanging oars on the wall using picture-hanging hardware is a simple and straightforward process.

Comparison Between Each Method

There are several ways to hang oars on a wall, each with its own advantages and disadvantages. In this article, we will compare the three main methods of hanging oars – nailing with sawtooth hangers, hanging with rope or twine, and hanging with picture-hanging hardware.

Cost

The cost of hanging oars on a wall varies depending on the method used. Hanging with rope or twine is the most cost-effective method as all you need is some twine or rope and some nails or screws to hang the oars.

Nailing with sawtooth hangers is a bit more expensive as you need to purchase sawtooth hangers, nails, and a hammer. Hanging with picture-hanging hardware is the most expensive method as you need to purchase the hardware, nails, and a hammer.

Ease of Use

All three methods are relatively easy to use, but hanging with rope or twine is the easiest method as it requires only a few basic tools. Nailing with sawtooth hangers is also relatively easy, but you need to be careful when hanging the oars to ensure they are straight and level.

Hanging with picture-hanging hardware is the most complex method as you need to carefully measure and mark the wall before hanging the oars.

Appearance

The appearance of the hanging oars also varies depending on the method used. Hanging with rope or twine gives the oars a rustic, nautical look while nailing with sawtooth hangers creates a more modern, clean look.

Hanging with picture-hanging hardware is the most professional-looking method, but it also leaves the most visible hardware on the wall.

The best method for hanging oars on a wall depends on your personal preference and the look you are trying to achieve. If you want a rustic, nautical look, then hanging with rope or twine is the best option.

If you want a more modern, clean look, then nailing with sawtooth hangers is the best option. If you want a professional, polished look, then hanging with picture-hanging hardware is the best option.

comparison table between the methods

MethodCostDifficulty LevelEase of RemovalDurability
Rope or TwineCheapEasyDifficultLow
Picture Hanging HardwareCostlyMediumEasyHigh

FAQs

What type of oars can I hang on the wall?

You can hang any type of oars that you have, including wooden oars, aluminum oars, or any other type of oar. Just make sure that they are sturdy and not too heavy for the method you are using to hang them.

Can I use regular picture-hanging hardware to hang oars?

Yes, you can use regular picture-hanging hardware, but you may need to make some modifications to ensure that the hardware is sturdy enough to support the weight of the oars. You may also need to drill holes in the oars to attach the hardware.

Is it possible to hang oars without drilling holes in the wall?

Yes, you can hang oars without drilling holes in the wall by using command strips or suction cups. However, these methods may not be as secure as using picture-hanging hardware, and you may need to adjust or replace the command strips or suction cups periodically.

How many oars can I hang on one hook or nail?

It depends on the weight of the oars and the strength of the hook or nail. You may be able to hang several light oars on one hook or nail, but you will need to test it to be sure.

How long will the adhesive on command strips or suction cups last?

The adhesive on command strips or suction cups will last for a few years, but it may need to be replaced periodically. The lifespan of the adhesive will depend on factors such as the weight of the oars and the humidity in the room.

Conclusion

Hanging oars on a wall can be done in several ways. Each method has its pros and cons, and the most suitable one depends on the individual’s preferences and requirements. The two most popular methods are using command strips and picture-hanging hardware.

Command strips are a quick and easy option, but they may not be strong enough to hold the weight of the oars. Picture-hanging hardware is a more robust option, but it involves drilling holes in the oars and the wall.

Ultimately, the best method will depend on the weight of the oars, the wall material, and the individual’s desire for a temporary or permanent solution. Regardless of the method chosen, hanging oars on the wall can add a touch of coastal charm to any room and make a beautiful decorative statement.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *