If you have wooden dowels that are stuck in your door, there are a few ways to get them out. You can use a plunger, hammer, or chisel. If the dowel is too big for one of these tools to fit into the hole, you can try using a saw.
Finally, if all else fails and the dowel is too big to remove with any of these methods, you can try using a heat gun.

Source: theenglishwoodworker
How To Get Wooden Dowels Out
If you have wooden dowels stuck in a piece of wood, it is important to use the right tools to extract them. Here are three methods that you can use to remove wooden dowels: using a saw, using a drill, and using a hammer and nail.
Use A Saw
Dowels are difficult to remove when they’re stuck in the wood, but with a saw, it’s easy to free them up! Make sure you have the right tool for the job before starting – a saw that is specifically designed for removing dowels.
Saw slowly and steadily so you don’t nick or damage the surrounding wood. If your dowel is particularly tight, use a drill bit to break it apart instead of sawing. Once your dowel is loose, gently pull it out of the wood and dispose of it properly.
Don’t forget to clean up any debris left behind – a saw blade can be dangerous if not handled correctly! When removing dowels from around corners or curves, be extra careful not to snag on anything else in the way.
Remember that wooden furniture isn’t meant to be constantly moved; leave it where it belongs! Be patient – even if your dowel removal doesn’t go as planned at first, keep trying until you get it done And finally: avoid using a power tool if possible; this could cause further damage to your furniture.
Use A Drill
If you’ve ever had to get wooden dowels out of a hole, then you know how frustrating it can be. You may have tried using a drill, but if the dowel is stuck really tight, the drill just spins around and around.
A better approach is to use a wedge. Insert the wedge into the end of the dowel and pull up on it until it pops out of the hole. Be careful not to damage the surrounding wood – use moderate pressure when removing the wedged dowel.
Now that you know how to get wooden dowels out easily, you can save yourself some hassle in the future!
Use A Hammer And Nail
If you’re having trouble getting wooden dowels out of your drywall, try using a hammer and nail. Simply drive the nail into the top of the dowel and then pound it with the hammer until it comes out.
Be careful not to hit any other wires or pipes in the wall; this could cause serious damage. Another option is to use a nut driver or pike pole to remove the dowels. However, if all else fails, you can call a professional for help.
Always wear safety goggles when working with tools in your home, and don’t hit yourself with the hammer or nails! Dowels can often be reused if they are removed correctly, but always test first before reinstalling anything in your walls.
Don’t forget to clean up any debris that falls during the process – this will help avoid future problems. Finally, be sure to document what was done so you have a clear picture of how everything goes back together once repairs are complete.
Remove The Screws
When removing screws from wooden surfaces, you may need to use a drill bit that’s the same size as the screw. Use a Phillips head screwdriver to twist and remove the screw.
If the screw is stuck, apply pressure with a hammer and then twist the screwdriver. Apply heat by using a blowtorch if needed to loosen stubborn screws. If all else fails, use a chisel or saw to cut through the wood around the screw.
Be careful not to damage the surrounding surface when working on wooden surfaces; use caution when drilling into hardwood floors or cabinets too! After removing screws, clean up any debris and repair any damages if necessary before moving forward with your project.
Always wear safety gear when working with tools and make sure your workspace is clean and free of flammable materials before beginning work.
Use A Saw
If you’re having some trouble getting the wooden dowels out of your piece of furniture, there are a few steps you can take to make the process easier. Start by using a saw to cut off any extra material around the dowel.
Use a pick to pull the dowel out from the wood. Be careful not to damage the surrounding wood with your saw or pick, and be sure to clean up any debris afterward. Once you have removed all of the wooden dowels from your piece of furniture, you can finish sanding and prepping it for restoration or refinishing.
Drill Out The Hole
When drilling a hole in a piece of wood, be sure to use the correct size dowel for the task at hand. By properly drilling out your hole, you can avoid damaging the surrounding material or creating unwanted holes in your project.
If you are unable to drill a hole out completely, you can use a jigsaw to make an opening that is just large enough for the dowel. When using a jigsaw, take care not to cut too much off the edge of the wood – this could create instability in the finished product.
Once you have created your desired hole, insert the dowel and secure it with clamps or nails. If needed, sand down any rough edges on the dowel before finishing your project. Finally, paint or stain your project as desired and enjoy your newly drilled hole.
Push The Dowel Out
If you have trouble getting wooden dowels out of a hole, try this simple technique. Push the dowel out from the front and then pull it out from the back. Be sure to use your fingers to grip the dowel while pushing and pulling it out of the hole.
This technique is best used if the hole is small and close to the surface of the wood. Another option is to use a drill bit that’s larger than the dowel so that you can grip it with both hands. Make sure that you wait until the drill bit has stopped spinning before removing it from the hole.
If using a drill bit will not work, then you may need to use a saw or chisel to cut away at the surrounding material around the dowel hole. Once you have removed the dowel, clean up any remaining debris with a putty knife or sandpaper. Repeat steps if there are multiple dowels in the same area of wood.
Conclusion
If you are having difficulty getting the wooden dowels out of your vinyl fence, try using a chisel or a hammer. Be careful not to injure yourself when attempting to remove them; use gloves if possible.
Make sure that the area around the hole is clean and free from any debris before attempting to remove the dowels. If all else fails, contact a professional fence contractor for assistance.