If you’re looking to add a bit of extra detail to your wood projects, beveling may be the perfect solution. This technique can be used with a circular saw, and it’s easy to do.

Here are some tips on how to do it.

 Bevel Wood With A Circular Saw

Source: Finehomebuilding

How To Bevel Wood With A Circular Saw

If you are looking to add a bit of pizzazz to your woodworking projects, then beveling may just be the answer. Beveling is the process of angling a cutting edge towards an angle other than degrees.

This can give your projects an interesting and unique look. To bevel wood with a circular saw, first locate the bevel point. Then set the blade to the right depth and place the material over the blade.

Press the saw button to start cutting. Be sure to hold on tight.

Locate The Bevel Point

To achieve a beveled edge on wood with a circular saw, you will need to locate the bevel point. This point is located approximately inches from one end of the blade and opposite the miter gauge mark.

Use a straightedge or guide rail to help align the blade at this point and start the cut. Once the blade has made contact with the wood, use your hand to keep it lined up as you make successive cuts around the circumference of the project.

When you reach the other end of the project, use your miter gauge to adjust your angle and finish cutting off the excess material. Be sure to clean your saw after each cut to prevent nicks in your wood and potential damage.

Set Blade To The Right Depth

To set the blade depth for beveling wood with a circular saw, be sure to line up the blade on the rail and adjust the height of the arm. Beveling wood is a simple project that can add an extra touch of style to your home.

You don’t need to be an expert when it comes to using a circular saw to bevel wood – just follow these tips and you’ll get the job done quickly and easily. When starting out, slowly accustom your eyes to seeing angles in degrees rather than traditional right angles.

Keep safety in mind while working with a circular saw – stay alert, use proper safety gear, and hold the workpiece firmly while cutting. Don’t forget about dust control when beveling wood – a clogged blower will cause your blade to dull much faster than necessary.

Cleanup is easy after beveling wood – all you need is some elbow grease and a hose attachment for your garden hose. Before moving onto the next piece of wood, double-check the angle of your last cut by using a protractor or yardstick against an object nearby.

If you make a mistake while beveling wood, simply use a wooden block as a guide and start over from scratch; there’s no need to damage your furniture or walls in the process. Enjoy adding simple but stylish details like beveled wood to your home projects – it’s easy once you know how.

Place Material Over Blade

To bevel wood with a circular saw, first make sure the material is stable and facing the blade securely. Place the material so that it covers the width of the blade and leaves a inch border on all sides.

Saw slowly to avoid damaging the edge of the material or your hands. Bevel wood with a circular saw by following these simple steps: place material over blade, hold grip down against wood surface, and rotate handle in a clockwise motion.

If you’re not sure how to do it properly, ask an expert for help before starting your project.

Press Saw Button To Start Cutting

To start beveling wood, place the wood panel on a stable surface and press the saw button to start cutting. Be sure to hold the wood panel firmly with both hands when you are cutting to avoid accidents.

When you have finished beveling the first side, do not turn the board until you have completed beveling both sides of the panel. If necessary, adjust the blade’s angle while sawing to reach your desired results.

Remember that it is important to use a straight edge when cutting beveled edges so that they line up correctly after being cut. Finally, clean any cuts made with a sharp blade with a cloth or a brush before completing your project.

After completing your project, use a sandpaper block or belt sander to smooth out any rough edges on your wood panel. Securing your newly bevelled wood panel in place can be done in several ways: by nailing it down, using screws and bolts, or by gluing it down with an adhesive.

Make sure that all surfaces of your newly beved wood panels are smooth before painting them or finishing them with a sealant or finish of your choice.

Preparing The Wood

Beveling wood can be an easy process with a circular saw if you plan ahead and have the right tools. First, mark the desired angle on the wood using a protractor or a straightedge.

Second, clamp down the wood at the desired angle and make sure it’s securely held in place using clamps. Then use your circular saw to cut the beveled edge along the marked line. Finally, sand the edges of the beveled piece and finish with a coat of sealant or paint.

Beveling wood is a great way to add character and uniqueness to your projects. And best of all, it’s an easy project that can be completed in just a few minutes with some basic equipment! Beveling wood is a great way to update any old piece of furniture or cabinetry in your home.

You can also use beveled Wood to create unique vases, candle holders, ornaments, and more! So whether you’re looking for something simple like new drawer fronts or something more complex like custom cabinet doors, beveling wood is an easy way to get started.

Setting Up The Saw

To bevel wood with a circular saw, follow these simple steps: First, identify the angle you want to create on the wood by setting the blade at that angle and measuring the depth of the cut.

Second, adjust your saw’s cutting depth accordingly so that it creates the desired angle on the wood. Third, hold onto the board while using your left hand to guide it across the blade and into position.

Fourth, use your right hand to apply pressure to the board in order to keep it in place as you make your cut. Fifth, release your grip on the board when it has been bevelled; it should now fall away from the blade easily.

Sixth, repeat Steps until all of the wood is bevelled in accordance with your desired angle and depth. Finally, clean up any loose debris from around the edges of your cuts with a sharp knife before applying a finish or protecting your new piece of furniture with a coat of paint or sealant.

Using The Bevel Blade

If you want to bevel wood with a circular saw, there are a few things that you need to know. The first is the angle that you need to hold the blade at in order to get the desired bevel.

Secondly, it is important to use the correct size bevel blade for the task at hand. And lastly, keep in mind how long you should hold the saw before moving it across the board. Following these tips will help you get perfect results every time when beveling wood with a circular saw.

Making The Cut

Beveling wood is an easy task with a circular saw, but it can be a bit tricky at first. Follow these tips to get the best results when beveling wood: –

Use the correct blade for the material you are beveling-Tilt your saw blade in the right direction-Make sure your fingers are positioned on the handwheel in the correct spot-Hold the board firmly against the fence while making the cut You can also use a jigsaw to make precise cuts, but it may take more time and effort.

Once you have made your cuts, sand them smooth using a fine grit sandpaper. If you want to add a decorative edge to your piece of wood, then you will need to finish it off with a router or a hand chisel.


To bevel wood with a circular saw, you will need to adjust the blade’s kerf depth and angle.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *