If you have an existing wrought iron fence and want to attach wood fencing, there are a few things that you need to keep in mind. First, make sure that the screws that you use are the right size for your fence.

Secondly, make sure that the wood is secured to the fence using the appropriate screws and nails. Finally, be sure to clean up any excess wood so that it does not damage your fence or create safety concerns for yourself and others around it.

Attach Wood To Existing Wrought Iron Fence

Source: fencetrac

How To Attach Wood To Existing Wrought Iron Fence

If you are looking to attach wood to your existing wrought iron fence, then you will first need to get a level and measure the distance from top of fence to bottom of post.

Afterwards, purchase the right nails, assemble the fence with the nails, apply pressure and fasten posts to foundation or ground.

Get A Level

If you want to attach wood to your existing wrought iron fence, leveling is essential for a smooth finish. Leveling the fence using a spirit level ensures that the boards are even and the joints meet at right angles.

You can use a level to adjust the position of screws on both sides of the fence post. Once screws are in place, hold the spirit level against one side of the screw and tighten the screw with a wrench. Repeat on the other side, making sure that both levels are precisely aligned before tightening all screws.

The finished project will look better and be more stable if you level your fence before attaching wood panels or posts. Be careful not to over-tighten screws; this could cause them to loosen over time and damage your fence.

Measure The Distance From Top Of Fence To Bottom Of Post

One of the first steps in attaching wood to an existing wrought iron fence is measuring the distance between the top of the fence and the bottom of the post. Once you have this information, use a level to make sure your attachment points are level.

Mark where you will drill holes for screws into both the fence and post, then start screwing them in place. If your fence has ornamental features, be sure to secure them with nails instead of screws so they don’t come loose later on. Be patient when attaching wood to an old, rusted fence- it can take some time but it will look great in the end.

Purchase The Right Nails

Before purchasing the right nails for attaching wood to an existing wrought iron fence, it is important to measure the rail of your fence. You can use a hammer and nails to attach wood to a fence rail, but you will need to make sure that the nails are long enough.

If you choose to use screws instead of nails, be sure to pre-drill the screw into the rail and then insert it into the wood. When attaching wood to a wrought iron fence, it is important to use weatherproof sealant on both the rail and the surface that you are attaching the wood too.

Always use safety precautions when working with old or rusty fences – wear gloves, long sleeves, and eye protection when attaching wood! Once your project is finished, be sure to clean up any debris that may have accumulated – a wire brush will do the job nicely.

Wrought iron fences can add character and style to any backyard – don’t forget about using quality nails and hardware! Check with your homeowner’s insurance policy before beginning your project – some policies may cover damages caused by faulty installation of new fencing materials.

Be sure to consult with a professional if you have any questions about installing new fencing materials – they will know what type of nails and screws work best for your specific situation! Enjoy your new addition to your backyard – remember to take care of it by cleaning up after yourself.

Assemble The Fence With The Nails

The first step in assembling your new wrought iron fence is to take down the old one. Next, measure and mark where the posts will go in the ground. Anchor each post with a washer and nut using a hammer and screwdriver.

Place wire mesh around each post before nailing it into the ground. Drive screws through the mesh and into the posts, then attach fencing panels to each end of the posts. Before painting or sealing your fence, be sure to brush away any dirt or dust from the surface of the wood.

You can now enjoy your beautiful new fence.

Apply Pressure And Fasten Posts To Foundation Or Ground

When attaching wood to an existing wrought iron fence, use pressure and fasten posts to foundation or ground. Drill pilot holes before inserting the posts so that you don’t damage the fence.

Drive screws into the posts and attach the wood using a level and screwdriver. Make sure that you hold the wood firmly against the fence while attaching it with screws. If you notice any bowed or warped boards, use a hammer and nails to fix them in place.

Finish by painting or staining your new fence as desired

Preparing The Wood

Preparing the wood for attaching to your wrought iron fence is important in order to avoid any problems down the road. Always use a level when attaching the wood to your fence, and make sure that you have marked where the screws will go.

Make sure that the wood is dry before attaching it to the fence, as wet wood will cause problems when trying to screw it in place. Securely fasten the screws and be careful not to over-tighten them; this can damage your fence. Once attached, check for any gaps or mismatches in your fence and fix them as necessary.

Clean up any debris that may have fallen during installation and enjoy your newly reinforced wrought iron fence.

Using A Jigsaw To Cut The Wood

When attaching wood to an existing wrought iron fence, there are a few things to keep in mind. Start by measuring the fence post and cutting the board to length using a jigsaw.

Make sure that you cut the board at a degree angle so that it will fit flush against the post once attached. Once the board is cut to size, use a drill bit to make a pilot hole before screwing in the screws.

To prevent the wood from warping or splitting, seal the surface with a coat of paint or sealant before attaching it to the fence post. If you have access to an old gate or door, consider using it as your fencing piece instead of buying new wood.

Wrought iron fences can last for many years if taken care of properly – just be sure to remove any moss or algae buildup periodically.

Hanging The Wood On The Fence

Before attaching any wood to your wrought iron fence, be sure to measure the distance between the posts and gates. Next, use a level and a saw to make cuts on both ends of the lumber you’ll need.

Make sure that your screws are long enough so that they will go through the post and gate without touching the ground. You can then screw the lumber in place using either deck screws or nails depending on what kind of fence you have.

If you have a privacy fence, you may want to add wire mesh to the top of the posts before adding your wood. When attaching wood to an existing fence, it is important to take into account weather conditions and maintenance needs. Wood should be treated like any other exterior paint when protecting it from the elements and insects.

Always use a safety guard when working with power tools around fences – even if they are made from wood! Fences can last many years with proper care, but they may require repairs over time – especially if they are subjected to heavy rain or snow loads. . Remember: fencing is a beautiful addition to any property – but it must be well maintained for it to look its best.


If you are installing a new wrought iron fence, make sure to attach the wood in the correct location and orientation. For existing fences, there are various ways to attach wood posts to the wrought iron fencing.

Be aware of the weight limit for your fence and use proper installation techniques to avoid damage. Finally, be sure to seal all cracks and joints in your fence with a quality outdoor sealant

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *