Round over plywood is a technique used to create a smooth, even surface on plywood. It is often used in the construction industry to cover exposed wood and to protect the wood from moisture and weather damage.

To round over plywood, you will need some sandpaper, a straight edge, and a drill. First, mark the outline of the ground over on your plywood with a pencil. Then use the sandpaper to create the rounded edge. Finally, use the drill to make a small hole in the center of the roundover.

Round Over Plywood

Source: youtube

Can You Round Over Plywood

Plywood is a versatile material that can be used for many different purposes. For example, you can use it to build furniture or cabinets, as well as outdoor furniture. Additionally, plywood has many uses in the construction industry.

One of the most common uses for plywood is in roundabouts and other curved roadsides. To make sure that your plywood rounds over smoothly, you will need to purchase a circular saw and remove the exterior surfaces of the board. Next, cut the plywood to size with a circular saw and apply a second layer of wood over the entire board using nails or screws.

Finally, round over the edges of the plywood with a hammer or an edge chisel

Purchase A Circular Saw

When purchasing a circular saw, keep in mind the size of the blade and the type of material you will be cutting. Decide on the RPMs that you need, as well as the size of blade that will fit your needs.

Compare price tags to find the best deal on a circular saw. Be sure to read reviews before making your purchase, so you can get an idea of what features to look for when shopping. Before starting to cut, make sure your workspace is clear and free from objects that may be damaged by the saw blade.

When using a circular saw, always wear safety glasses, gloves, and a face shield to avoid injury. If the job is too big for your circular saw or if it starts jamming, consult an expert for help before moving onto another task. Make sure all debris has been cleared from around the work area before beginning any cutting with a circular saw; this includes pieces of wood as well as nails and screws.

Plywood Has A Wood Grain

Plywood is a type of wood paneling that’s often used in construction. It’s made from thin sheets of wood that are glued together and then cut to the desired size.

If you see a pattern in the plywood where the grain runs perpendicular to the edge of the board, this is called a roundover. A round over is an easy way to give your plywood a finished look, and it’s usually done by hand.


When you round over plywood, you are creating a smooth edge on the board that is intended to hide the grain of the wood. This type of finish is used on furniture and other items that need to look professional and polished.


Rounding over plywood is a very durable process. The rough edges that are created will not damage the wood or the finish that has been applied to it.


Because rounding over plywood is such a simple process, it does not require any special tools or skills. You can do it yourself with just a few basic supplies.


Roundover plywood is generally less expensive than other types of plywood finishes. This is because it does not require any extra steps or layers of protection, which means less labor cost for the contractor.

Remove The Exterior Surfaces

When you’re removing the exterior surfaces of a piece of plywood, it’s important to round over the edges. This will help prevent damage to the wood and keep your tools from gouging into the surface.

Can’t Remove Paint

Paint can be a tough obstacle to remove when you’re trying to refinish your exterior surfaces. This type of paint is designed to protect the underlying wood, so it will take some extra effort to get it off. You may need to use a chemical stripper or sandpaper in order to get rid of the paint.

Damage from Weathering

If your exterior surfaces have been exposed to weathering over time, they may not be able to be removed without causing damage. This includes things like rust and moss. Damage caused by weathering will make it difficult for you to remove the existing coat of paint and replace it with a new one.

Damaged Surfaces

If your exterior surfaces are damaged in some way, they may not be able to be refinished or repaired. This could include holes caused by hail or vandalism, or peeling paint due to exposure to the sun or elements.

Uncooperative Wood

Some woods are much harder than others when it comes to removing old paint and refinishing new materials over the top of them. If your wood is uncooperative, you’ll likely need to find another option for refinishing your exterior surfaces.

Lack of Preparation

Before starting any kind of renovation project, make sure that you’ve prepared the surface you’re working on properly. This includes removing all traces of previous materials and cleaning the area well with a degreaser or scrubber.

Cut Plywood To Size With A Circular Saw

If you need to round over a piece of plywood, you’ll need to use a circular saw. This tool can easily cut the plywood into the correct shape around the edges. Be sure to use a guideline so that you don’t end up with jagged cuts.

Safe Operation

When using a circular saw, it is important to be safe when cutting plywood. Always use the correct safety equipment and follow the instructions that come with your circular saw.

Correct Plywood Sizing

When you are cutting plywood, it is important to size it correctly so that the pieces fit together perfectly. You can do this by measuring the width and length of the boards you want to cut and then rounding off the measurements to the nearest inch.

Keep Your Hands and Arms Protected

Always keep your hands and arms protected when using a circular saw. Wear eye protection, gloves, and a dust mask if necessary.

Apply A Second Layer Of Plywood Over Entire Board

If you have a large piece of plywood that’s been rounded over, it can be helpful to apply a second layer of wood over the entire board. This will help to prevent any warping or damage to the original surface of the plywood.

It also adds an extra layer of protection against scratches and other damage. You can do this by either using wood glue or wood screws. Be sure to allow enough time for the second layer to dry before continuing with your project.

Rounding over plywood is a simple way to add extra protection and stability to your project. And if you ever need to replace the plywood, applying a second layer will make it easier and cheaper to do so. Keep in mind that applying a second layer of plywood may increase the overall cost of your project.

However, if you take care when rounding over plywood, it can be a relatively easy task that results in long-term benefits for your project. Remember to plan ahead when roundingover plywood – allowing enough time for both layers to dry is key!

Using Nails Or Screws, Round Over Edges

Sometimes, when you are trying to round over an edge on plywood, nails or screws may not be the best option. Instead of using nails or screws, try a different approach that is more effective and less damaging.

You can use a wood plane to smooth out the edges of your plywood so they are rounded over. This technique is simple to do and it will make the edges of your plywood look professional. After rounding over the edges of your plywood, you may want to seal them with a coat of paint or a finish.

If you don’t plan on using the plywood for any other purpose, then you can simply discard it after rounding over the edges. Rounding over the edges of plywood is a simple project that can improve the appearance of your project overall. Be sure to read the instructions that come with your wood plane before beginning this process if you haven’t done so before.

Keep in mind that there is a risk involved when using a wood plane, so take precautions while working with it. By following these simple steps, you can easily round over edges on plywood without having to use nails or screws

To Recap

There are a few things you need to consider before rounding over plywood. First, make sure the plywood is flat and free of any major damage. Second, make sure the roundover is done accurately and smoothly.

Finally, use a proper sealant to ensure the roundover lasts.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *